Produkter


Kort och Direktbetalning via din Internetbank
Produkter   » Scenmekanik & Podier » Stegtruss » BISYSTEM PBT
BISYSTEM PBT

BISYSTEM PBT

 

  BISYSTEM PBT is a 2-point truss system made of aluminium. The individual elements are connected via two tube fasteners and two M8 bolts and nuts.
  The two main chords are made of 50 mm aluminium tube with 2 mm wall thickness and offer a good relation between strength and weight. The braces have a diameter of 12 mm with 2 mm wall thickness and leave enought space for installing couplers, hooks and clamps.
  With 238 mm outer dimensions, BISYSTEM PBT is a relatively compact truss system for higher loads. BISYSTEM PBT is mainly designed for permanent installations in shops, discotheques and theatres.
  By using the optional rapid snap connectors, this system can also be used for fair installations and event installations.
  Altogether a universal truss system impressing with its wide range of standard system lengths, corners and accessory.
  All elements of this truss system comply with the high standards for building material required by German legislation ("Ubereinstimmungsverordnung"). Fulfilling these standards is documented via the U-mark on every ALUTRUSS element.
  The documentation of this truss system is closely related to the Codes of Practice SR 1.0 - Provision and Use of Truss Systems published by the VPLT/PLASA. The required load tables and the engineering drawings can be downloaded from the Internet before buying the product!
  The production of this truss system is TUV-monitored. This standard is documented via the TUV-mark on every BISYSTEM straight.
  Please note: this truss system must never be combined with other systems!

System components (straights):
Designation  No.           Weight (kg)
PBT-200      60300100   0,6
PBT-400      60300200   1,0
PBT-600      60300250   1,3
PBT-800      60300300   1,7
PBT-1000    60300350   2,1
PBT-2000    60300400   3,8
PBT-3000    60300450   5,6
PBT-4000    60300500   7,3
PBT-5000    60300550   9,1
Materials used:
Alloy EN-AW 6060 T66 (AlMgSi0.5 T66)
Main chords 50 x 2 mm
Braces 12 x 2 mm
Accessory/truss 2 x connector PSP1, screws, nuts
Load table PBT:
Span (m) Point load (kg) Deflection (mm) UDL (kg/m) Deflection (mm)
2 260 2,1 165 2,7
4 105 8,3 36 9,2
6 102 15,8 34 19,4
8 71 27,6 18 34,0
10 55 44,7 11 53,9
12 42 65,1 7 75,5
Maximum system-length: 12 meters

The load capacities given in this load table are based on the German standard DIN 4113.
The capacities are only valid for static loads supported at both ends and must never be exceeded!
Please refer to the VPLT Code of Practice SR1.0 available under www.plasa.org and www.vplt.org
For BS and ANSI compliance multiply the given capacities with 0.85.

This load table is only valid for trussing systems made of ALUTRUSS components.
This load table is not valid for circular truss.

TUV-approval: Welding approval:
Mark approval certificate no.: 25029771001 Welding certificate no.: Al 6316/04
Test report no.: 153388
The information basis of this publication corresponds with the date of printing. 19.02.2007



373,75
Art nr. 60301450
777,50
Art nr. 60300700
721,25
Art nr. 60300800
732,50
Art nr. 60300900
720,00
Art nr. 60301000
975,00
Art nr. 60301100
772,50
Art nr. 60300650
777,50
Art nr. 60300750
736,25
Art nr. 60300850
736,25
Art nr. 60300950
736,25
Art nr. 60301050
från 350,00
772,50
Art nr. 60300600
873,75
Art nr. 60301210
1 457,50
Art nr. 60301250
1 452,50
Art nr. 60301350
1 470,00
Art nr. 60301410
975,00
Art nr. 60301150
873,75
Art nr. 60301200
1 450,00
Art nr. 60301300
1 452,50
Art nr. 60301400
1 470,00
Art nr. 60301420
373,75
Art nr. 60301454